|
65’ x 46’ Ladder Roof Ground Support
Roof/Grid System Includes the Following Components
Entire roof structure aluminum is 3/16” wall
thick.
20 TRS3020-120S Heavy Duty Truss 10’w/spigots
6 TRS3020-120S-FOLD Folding Heavy Duty Truss
10’w/spigots
32 TRS30LB-120S 30” Ladder Beam 10’w/spigots
10 4-WAY CONNECTION 4-Way Ladder Connection
14 3-WAY CONNECTION 3-Way Truss/Ladder Connection for
Perimeter
5 4-WAY TL CONNECTION 4-Way Truss/Ladder Connection
for Folding
4 TRS3020-S2S Ladder Roof Sleeve Block 30”x20” 2Way
w/spigots
2 TRS3020-S3S Ladder Roof Sleeve Block 30”x20” 3Way
w/spigots
6 TRS12G3-BS 12” Ladder Roof Base w/Leveling Pads and
spigots
6 TRS12G3-OS56 Outrigger/Stabilizer for Ladder Roof
Hinge Set of 4
6 TRS12G3-H56S 56” Hinge Block for Ladder Roof
w/spigots
12 TRS12G3-120S 10’ Mark 3 12” Tower Section w/spigots
6 TRS12G3-120TS 10’ Mark 3 Tower Top Section w/spigots
6 TRS12G3-060S 5’ Mark 3 Tower w/spigots
6 TRS12G3-HBS 12” Headblock w/spigots
1 CANOPY RAIL SYSTEM Rafters and Hard Rails
1 CANOPY In three pieces
1 PLAN X-BRACE KIT
4 PIN PULLER
4 LOAD BEAM To Span Between Ladder Beams for
Additional
Rigging Points
1 LDR TWR LIFTER Tower Lifter for Ladder Roof w/o
motor
1 STRUCTURAL REPORT
*2 TRS3020-120F Folding Heavy Duty Truss 10’w/spigots
*2 TRS3020-S3S Ladder Roof Sleeve Block 30”x20” 3Way
w/spigots
*8 SNAP BRACE Snap Brace for Folding Truss
*Additions for fly bay are new and never used.
To complete fly bays, you would need to purchase 2 additional 35’ x 12”
towers including head blocks and tower bases
|
